Nigeria passport — 35×45 mm photo maker
35×45 mm at 600 dpi, head 70–80% of the frame, plain white behind you. Guides and a print sheet, on your device.
- 0 uploads
- No limits
- No signup
- Works offline
35×45 mm · 827×1063 px · 600 dpi
Filestay is an independent tool and is not affiliated with, endorsed by or connected to any government or visa authority, including the U.S. Department of State. We make the file match the published technical requirements — acceptance is always the issuing authority's decision.
The official requirement
- Photo size
- 35×45 mm
- Pixels
- 827 × 1063
- Resolution
- 600 dpi
- Head height
- 70–80% of image height
- Background
- Plain white
Also required
- Front view, neutral expression
- Taken within the last 6 months
Source: Nigeria Immigration Service. Requirements change — check the source before you submit.
A Nigerian passport application asks for your face twice over. You attend your chosen Immigration Office so the photograph and biometric data can be captured there, and the paper file separately carries two passport-sized prints endorsed on the reverse by your guarantor. Those prints are what this preset produces.
How much of the frame the head has to fill
Seventy per cent of the 45 mm height is 31.5 mm, eighty per cent is 36 mm, and the face lands somewhere between: 744 to 850 of the 1063 pixels that make up the height of an 827-wide file at 600 dpi. The midpoint, 33.75 mm, is the target worth hitting, holding 2.25 mm of margin on each side — roughly the depth of a fringe. Prints get handled, so exact size counts.
What gets this one sent back
- The reverse of each print gets written on, so use paper that takes ink. Gloss beads a biro and smears under a thumb.
- Plain white behind you. Cream paint and beige curtains render warm, and warm reads as a colour cast rather than white.
- Run both copies from one frame rather than two similar shots; a file that matches itself raises fewer questions.
Half a metre clear of the wall so your shadow falls behind you, camera at about 1.5 metres so the lens does not widen your nose, soft light from the front. Take several.
Getting the print right
35×45 mm is a physical instruction; 827×1063 pixels is what it becomes at 600 dpi. The head band follows the same conversion — 70–80% of 45 mm is 31.5–36.0 mm, or 744–850 pixels in the exported file.
No digital ceiling is published for this one, which means the print is the binding version and the file only has to survive being printed. Use the sheet rather than sending a single image to a shop — several copies at true size on one page costs the same and covers the spare everyone ends up needing.
Print at 100%, not "fit to page" — the default shrink is invisible to you and measurable to whoever checks it.
How it works
- 01Add a recent photoFacing the camera, plain wall behind. HEIC from an iPhone works directly.
- 02Frame it to 35×45 mmDrag and zoom until your head fills 70–80% of the frame height, matching the dashed guide.
- 03Check the warningsThe border area is measured against "plain white" and flagged if it is uneven.
- 04Download or printSave the 827×1063 JPG, or take a print sheet with several copies laid out at true size.